CONTROL PANEL
Note: If the remote controller is missing, operate on the control panel.
2
1
TURBO
HIGH
LOW
AUTO
4
Not available for cooling
only model
3 6 4 5
ON/OFF button
Operation starts when pressing this button, and
stops when pressing this button again.
SWING button
Activate the automatic air swing function.
FAN SPEED button
Select the fan speed AUTO,LOW, HIGH and
TURBO in sequence.
Note:
1.
When setting fan mode by the remote
controller, turbo function is unavailable for the
fan mode. Turbo function can only be set by
the buttons on the control panel.
2.
If the unit is without medium fan speed,
when receiving medium fan speed command
from the APP or remote controller, the unit will
operate at high fan speed.
(+/-) / TIMER button
Press the + button to increase the set(operating)
temperature of the unit,and press the - button to
decrease the set(operating) temperature of the
unit.the temperature setting range is
from 61~86℉( 16-30℃) .Press
TIMER button,then press +/- to
increase and decrease the time
setting. If the time setting is nomore
than 10 hours,the increment/
decrement is 0.5 hour by each press,if
more than 10 hours, the increment/
decrement is 1 hour by each press.
The time setting range is 0.5~24 hours.
MODE button
Select the operation mode,COOL,DRY,
FAN, HEAT .
FILTER CHECK indicator
This feature is a reminder of cleaning
the air filter(normal maintenance) for
more efficient operation. The light will
turn on automatically after the fan
works more than 250 hours.
If the light is on, turn off and power off
the unit, take the air filter out and
clean it, then re-install the air filter,
power on and turn on the unit, the
light will still be on, press FILTER
CHECK button,the light will turn off.
To Next Page
Loading...
Need help?
General