25
Tools for installation
Selection of installation location
1 Level meter 2 Screw driver 3 Impact drill
6 Torque wrench
5 Pipe expander
4 Drill head
7 Open-end wrench
8 Pipe cutter
9 Leakage detector
10 Vacuum pump
11 Manometer
12 Universal meter
13 Inner hexagon spanner
14 Measuring tape
Note:
Basic requirement
Indoor unit
• Contact your local agent or a certified
technician for installation.
Installing the unit in the following
places may cause malfunction. If it is
unavoidable, please consult your local
dealer or a certified technician:
1. A place with strong heat sources,
vapors, flammable or explosive gas,
or volatile objects spread in the air.
2. A place with high-frequency
devices (such as welding machine,
medical equipment).
3. A place near coast area.
4. A place with oil or fumes in the air.
5. A place with sulphurous gas.
6. 0ther places with special
environment.
7. The appliance cannot be installed
in a laundry.
1. There should be no obstruction near
air inlet and air outlet.
2. Select a location where the conden-
sation water can be dispersed easily
and won't affect people.
3. Select a location which is convenient
to connect the outdoor unit and the
closest possible to the power supply.
4. Select a location which is out of
reach for children.
5. The location should be able to
withstand the weight of indoor unit
and won't increase noise and
vibration.
6. The appliance must be installed
2.5m above floor.
7. Don't install the indoor unit right
above an electric appliance.
8. Please try your best to keep the unit
away from fluorescent lamps.
To Next Page
Loading...
Need help?
General
