EasyManuals Logo
Home>Gree>Air Conditioner>EXTREME Series

Gree EXTREME Series User Manual

Gree EXTREME Series
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
15
Replacement of batteries in remote control:
During operation, point the remote control signal sender at the
receiving window on the indoor unit.
The distance between signal sender and receiving window should be no
more than 8m, and there should be no obstacles between them.
• Signal may be interfered easily in the room where there is fluorescent
lamp or wireless telephone; remote control should be close to the indoor
unit during operation.
When replacing the batteries, make sure you use two identical batteries
(same brand).
When you don't use the remote control for a long time, please take out
the batteries.
• If the display on the remote control is fuzzy or there's no display, please
replace the batteries.
1. Press the back side of remote control marked
with" ", as shown in the fig; and then push out
the cover of battery box along the arrow direction.
2. Replace the two batteries (AAA - 1.5V); make
sure that the batteries are inserted correctly
with the polars '+' and '-' in the right position.
3. Reinstall the cover of battery box.
signal sender
Cover of battery box
Battery level will be displayed on the remote
controller.When " " is flickering, please
replace the batteries, otherwise, remote
controller can't operate normally.
reinstall
remove
Operation guide
1. After powered on, press ON/OFF button, the unit will
start to run. (Note: When it is powered on, the guide
louver of main unit will close automatically.)
2. Press MODE button, select desired running mode.
3. Pressing + or - button, to set the desired temperature
(It is unnecessary to set the temp. at AUTO mode.)
4. Pressing FAN button, set fan speed, can select AUTO
FAN, LOW, MEDIUM-LOW, MEDIUM, MEDIUM-HIGH
and HIGH.
5. Pressing and button, to select the swing.
1. Press SLEEP button, to set sleep.
2. Press TIMER ON and TIMER OFF button, can set the
scheduled timer on or timer off.
3. Press LIGHT button, to control the on and off of the
displaying part of the unit (This function may be not
available for some units).
4. Press TURBO button, can realize the ON and OFF of
TURBO function.
General operation
Optional operation
1
1
2
2
3
3
4
4
5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gree EXTREME Series and is the answer not in the manual?

Gree EXTREME Series Specifications

General IconGeneral
BrandGree
ModelEXTREME Series
CategoryAir Conditioner
LanguageEnglish

Related product manuals