LCD DISPLAY CONTROL PANEL
8
To turn the air conditioner on or off. When the unit is on, the LCD display
currently shows the room temperature.
Press this button to choose one of the following modes : COOL ; FAN ONLY ;
POWER SAVER. An indicator light goes on when selecting the mode.
Turns the timer on or off.
Decrease/increase the degrees (by 1) when setting the temperature in COOL
and POWER SAVER modes.
Decrease/increase the hours when setting the timer for an automatic start or
shut off of the air conditioner.
To set fan speeds : AUTO, LOW, HIGH or TURBO ; each level is paired with an
indicator light going on when selected.
The indicator light goes on when the filter is dirty. Once the cleaned filter is
back in place, press and hold on this button for 5 seconds to reset.
Indicator lights are paired with each fan speed level, going on when selected.
LCD display : currently shows the room temperature, except when setting
temperature or time when timer is on.
To Next Page
Loading...
Need help?
General
