Multi VRF Floor Standing Indoor Unit
25
8 Maintenance Method
WARNING!
①
Do turn off the unit and cut off the power when cleaning the air
conditioner, otherwise electric shock may happen.
②
Do not make the air conditioner wet or electric shock may be incurred;
ensure that the air conditioner will not be cleaned by water rinsing under
any circumstance.
③
Volatile liquid like thinner or gasoline would damage the appearance of
the air conditioner (Only soft dry cloth and wet cloth moistened with
neutral detergent could be used to clean the surface panel of the air
conditioner).
8.1 Cleaning Panel
NOTES!
Do take down it before cleaning.
①
Pull along the direction of arrows to take down the panel.
②
Clean the panel.
Clean it with a soft-hair brush, water and neutral cleaning fluid, and then dry
it.
CAUTION!
①
Do not use water above 45°C to wash the panel to prevent decoloration
or eformation.
②
Install the panel.
As shown in Fig 8.1, install the stands of both ends of the panel into the slot
and put the middle rotating shaft into the groove, then place the panel and clasp
back along the arrow direction.
To Next Page
Loading...
Need help?
General
