Multi VRF Floor Standing Indoor Unit
26
8.2 Cleaning the Air Filters
(1) Disassembling the air filter.
As shown in Fig 8.1, take out the decorative strip at position
①
and unscrew
the screw. After opening the glass panel and unscrew the screws fixing the air
filter. At last pull out the air filter along the arrow direction
②
.
(2) Cleaning the filter.
Slightly flat the filter or clean the filter with electric cleaner. If there is too
much dust on the filter, clean it with a little neutral detergent or warm water. After
that, dry the filter and reinstall it, as shown in Fig 8.1.
NOTES!
Do not dry the filter by exposing it under direct sunshine or near a heating
oven, or it may get deformed.
Fig 8.1
To Next Page
Need help?
General
