multifunction; For some function, which the model doesn't have, if press the corresponding
●
This is a general use remote controller, it could be used for the air conditioners with
button on the remote controller that the unit will keep the original running status.
12
Introduction for buttons on remote controller
Note:
● Do not throw or drop the remote controller; Do not let any liquid get into remote
controller; Do not put the remote controller at overheating position or the place
with direct sunlight.
● This remote controller is the universal one, which can be applicable for different
types of air conditioner. The functions which are not applicable for this air
conditioner are not introduced as below.
ON/OFF button
1
Press this button to turn on or turn off the air conditioner.
● Turn on or turn off the air conditioner can cancel previous timer, sleep functions.
+/- button
2
After each pressing of "-" or "+" button can decrease or increase set temperature
0.5°C. If press "-" or "+" button for more than 2s, temperature will change quickly.
The temperature setting range is 16~30°C. Note: Temperature can't be adjusted
under auto mode.
Cool button
3
Press this button turn on the cooling mode.
Heat button
4
Press this button can turn on the heating mode.
The remote controller adopts radio-frequency technology. It can be operated only
after matching successfully with air conditioner. The matching method is as below:
After energization, press
X-Fan/E-heater
button for more than 3s within 2m from the
air conditioner, and remote controller and air conditioner will enter into matching
status automatically. After matching is succeeded, air conditioner will give out
three sound. If matching is unsuccessful, please close to air conditioner and
perform the matching again. If the remote controller is invalid, please press that
button again to perform matching to eliminate the malfunction between remote
controller and air conditioner.
To Next Page
Loading...
Need help?
General
