27
Precautions of Installation
Important notes
■ All electric work must be performed by a licensed technician according to local
regulations and the instructions given in this manual.
■ If the air conditioner is to be moved to other place, please contact appointed
maintenance center in advance.
Basic requirements of installation location
Installing the unit in the following places may cause malfunction. If it is unavoidable,
please consult the local appointed maintenance center:
volatile objects spread in the air.
● The place with high-frequency devices, such as welding machine, medical
equipment.
● The place near coast area.
● The place with oil or fumes in the air.
● The place with sulfureted gas.
● Other places with special circumstances.
Selection of installation location
Indoor unit
gas will stay.
● Avoid installing the indoor unit in a moist place or in a place where oil may be
splashed on the unit.
● Select a location where outlet air may reach each corner of the room.
● Select a location where connection pipe can be led to outdoor conveniently.
● Select a location where air inlet and outlet won't be blocked.
● Select a location with least affection of outdoor air.
● Ensure the installation meets the requirement of installation dimension diagram.
● The appliance shall not be installed in the laundry.
Outdoor unit
not affect neighborhood, animals or plants.
● The ventilation of outdoor unit is good.
● There should be no obstruction near outdoor unit, which may affect air inlet and
air outlet of unit.
To Next Page
Loading...
Need help?
General
