will change quickly if holding "+" or "-" button). Time setting range is 0.5~24hours.
timer.
15
Introduction for buttons on remote controller
16
Press this button can turn on the turn off the light on the display.
Light button
18
● Under ON status, press this button to set timer OFF; Under OFF status, press
this button to set timer ON.
● Press this button once and the characters of HOUR ON (OFF) will flash to be
displayed. Meanwhile, press "+" button or "-" button to adjust timer setting (time
Timer button
17
WIFI button
15
Only in Cool or Dry mode,Press this button can set X-FAN function on of off
X-FAN E-HEATER
13
● When the unit is turned on, press this button to set purify function.
● If turn off the unit with remote controller, the purify function is defaulted OFF.
Under Eco-wind mode, if turn on the unit again after turning off the unit with
remote controller, the previous purify function will be kept.
● This function can’t be set when the unit is turned off. If switching modes, the
previous purify status will be kept.
●
In Heat mode,Press this button can select the E-HEATER in the sequence as
below:
●
Purity button
The character of " X-FAN " is displayed or no displayed.
AUTO E-HEATER
(no display)
E-HEATER ON
(”E-HEATER”display) (”E-HEATER OFF”display)
E-HEATER OFF
●
Press this button 3s can set wifi function on or OFF.
● At OFF status,press mode button and wifi button,can reset wifi mode parameter.
and open wifi function.
14
Press this button once can enter into or quit from sleep status.
Sleep function will be cancelled after turning off the unit. Sleep function can't be
set under fan, auto, E-joy or dry mode.
Sleep button
To Next Page
Loading...
Need help?
General
