Function and Control
16
6. Function and Control
6.1 Remote Controller Description
●
Press thisbutton to select LIGHT on or off
in the displayer. When the LIGHT on is
LIGHT button
LIGHT
set,the icon will be displayed and the
indicator light in the displayer will be on.
When the LIGHT off is set, the icon will
be displayed and the indicator light in
the displayer will be off.
●
ON/OFF button
ON/OFF
Remote control
Signal transmitter
AUTO
COOL
DRY
FAN
HEAT
(Only for cooling and heating unit.
As for cooling only unit, it won’t
have any action when it receives
the signal of heating operation.)
Middle fan
●
Press this button, Auto, Cool, Dry, Fan,
Heat mode can be selected circularly.
MODE button
MODE
Auto mode is default while power on.
Under Auto mode,the temperature will not
eht ,edom taeH rednU ;deyalpsid eb
initial value is 28ć
;Under other
modes,
the initial value is 25ć .
●
Press this button, Sleep On and Sleep
Off can be selected. After powered on,Sleep
SLEEP button
Off is defaulted. After the unit is turned
off, the Sleep function is canceled. After
Sleep function set up, the signal of Sleep
will di splay. In this mode, the time of timer
can be adjusted. Under Fan and Auto
modes, this function is not available.
●
Press this button, Auto, Low, Middle, High
speed can be circ ularly selecte d. Aft er
FAN button
FAN
powered on,Auto fan speed is default.
Low fan
AUTO
High fan
●
Press this button, the clock can be set up,
signal blink and display.Within 5
CLOCK button
CLOCK
seconds, the value can be adjusted by
pressing + or - button, if continuously
press this button for 2 seconds above,
in every 0.5 second s, the value on ten place
of Minute will be increase d 1. During blin king,
repress the Clock button, signal will be
constantly displayed and it denotes the
setting succeeded. After powered on, 12:0 0
is defaulted to display and signal will
be displayed. If there is signal be
value is Clock value, otherwise is Timer value.
displayed that denotes the current time
(
o
F)
82
(
o
F)
77
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
adjustable, low fan speed is imperative,
Note:Under the Dry mode, the fan speed isn't
adjustable, low fan speed is imperative,
but when op erating this button, the wireless
Names and Functions of Wireless Remote Control
Note: Be sure that there are no obstructions between receiver and remote controller ;Don't drop or throw the remote control; Don't let
any liquid in the remote control and put the remote control directly under the sunlight or any place where is very hot.
To Next Page
Loading...
Need help?
General
