Phenomenon Reason How to solve
In wash/rinse /s pi n, the machi ne
stops (The "wash" "ri nse"
"spin" indicator flash quickly)
The top lid is not closed. Close the top lid.
The draining does not work, or
the speed of draining is too
slow (the indicators of "rinse"
"spin" flash)
Is the drain hose blocked
by foreign material?
Clean the foreign material.
Open and close the top lid once.
The safety switch acts. The
spinning can not wo rk (t he
indicators of "wash" "rinse"
flash quickly)
Are the laundries put
slantingl y
Is the machi ne sla nti ng?
Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.
The program pauses after
about 8 minutes of water inlet
(the indicators of "wash" "spi n"
flash quickly)
The water faucet is not
open.
The water inlet valve is
blocked.
The water pressure is too
low and the current is too
small.
Open the water faucet. Push
the "Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
The machine does not act.
Is there power failure?
Is the power plug loose?
Use it when the power is on.
Insert the power plug tightly.
There's abnormal sound inside
the machine.
Is the machi ne sla nti ng?
Are the laundries slanting in
spinning?
Level the machine properly.
Re-order the laundries.
The water faucet leaks.
Is the jointer screw of the
water inlet hose is loose or
twisted awry?
Fasten the jointer screw
properly.
6-1.Trouble alarm and solve method
Chapt 6 MAINTENANCE SERVICE AND TROUBLE SHOOTING
To Next Page
Loading...
Need help?
General
Weight and Dimensions
