6-3-6 Too much spinning noise
6-3-7 No spinning
If the noise of the motor is too much
If the hanger is wrongly used
If the washing machine is
set horizontally
If the motor is fastened tightly
If the noise of the retarder is too much
If the departing of the
ratchet and pawl is well
If the machine body vibrate
resonantly with the cabinet
If the balance ring is rubbing
the outer tub cover
If the connecting pipe or the
wire unit bumps the outer tub
Fasten the motor
Replace the retarder
Adjust the angle or the distance of the ratchet and pawl
Adjust the cabinet to acquire balance
Adjust the gap between the balance ring and the outer tub
Fix the connecting pipe and the wire unit
Replace the motor
Replace the hanger
Set the machine horizontally
The hanger seat is lack of oil.
Inject oil at the hanger seat
The washing and draining are normal
Check the On/Off point of the dry
reed tube and stop switch
Check if the clutch pawl is pulled enough
Replace the dry reed tub or stop switch
Replace the drain motor
Replace the retarder clutch
No On/Off
point
Normal
Y
Y
Y
Y
Y
Y
Y
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
At this time please confirm if the drain motor works normally
-22-
To Next Page
Loading...
Need help?
General
Weight and Dimensions
