Haier HW50-1002W User Manual

SERVICE MANUAL
Front Load Washing Machine
8-2. Adjusting the washing machine
8-3. Joining the Inlet Hose to the Washing Machine
HW50-1002W
Levelling your washing machine
Before use you MUST ensure the washing
machine is level, check with a spirit level (5).
This will minimise vibrations and noise during
use plus reduce wear and tear.
Level by adjusting the feet under the appliance.
First adjust the feet
by hand to get the
appliance level then
tighten the nuts up to
the underside of the
appliance body using
a 16mm spanner (6).
5
6
C
。
90
C
。
60
C
。
40
C
。
40
C
。
30
Water inlet hose connection
Important: This washing machine
MUST only be connected to a cold
water supply.
Connect the water inlet hose, the angled
connection attaches to the water inlet on the
back of the washing machine (7). The straight
connection attaches to the water supply
valve (8). Ensure all seals are in place before
connecting.
Important: Only tighten the hose
connection nut by hand - do not
overtighten.
Water
inlet
hose
Water
supply
valve
Water
inlet
hose
7
8

Haier HW50-1002W Specifications

General

Brand	Haier
Model	HW50-1002W
Category	Washer
Language	English