9
English
1. Install the base stand; place the
TV on a solid surface.
Min
1 m
Ensure that the TV is placed in
a position to allow free flow of
air. Do not cover the ventilation
openings on the back cover.
To prevent any unsafe situations, no
naked flame sources, such as lighted
candles, should be placed on or in
the vicinity.
Avoid heat, direct sunlight and
exposure to rain or water. The
television shall not be exposed to
dripping or splashing.
2. Connect the antenna cable or
Cable TV cable to the ANTENNA/
CABLE socket on the back of the
TV set.
3. Remote control:
Remove the cover of the battery
compartment. Insert the 2 supplied
batteries (Type AAA 1.5V).
HTR-D09B
HTR-D09B
4. Power :
Connect the TV's power cable to a
power outlet.
5. Turn the TV on:
Press the POWER key on the
remote control or the power
button on the control panel on the
side of the TV.
Power Key
ZOOM
To Next Page
Loading...
Need help?
General
