16
Picture Mode
The Home Mode is intended for home
use, and will save energy, compared to
the showroom Retail Mode.
Setup Wizard (3/6)
Choose Your Picture Mode
Retail Mode
Home Mode
Move Select Previous Exit
EXITMENU
ENTER
Please select your picture mode, press
CH- or CH+ to select, press ENTER to
confirm.
TV Source
Press CH- or CH+ to select your TV
source. Press ENTER to confirm.
Setup Wizard (4/6)
Choose Your TV Source
Satellite Box
Cable
Antenna
Move Select Previous Exit
EXITMENU
ENTER
1. Antenna: Select this option if you
have connected an antenna cable to
your TV to receive over the air TV
signals. Your TV can receive analog
and digital (ATSC) TV signals.
2. Cable: Select this option if you
have connected a Cable TV cable to
your TV. In this mode, your TV can
receive analog and QAM Cable TV
signals.
3. Satellite Box: Select this option,
if you have connected your TV to a
satellite box.
Scan
Press ENTER to start the channel scan.
Press EXIT to skip the channel scan.
Setup Wizard (5/6)
Do You Want To Scan:
START
Move Select Previous Exit
EXITMENU
ENTER
Setup Wizard (6/6)
Scanning for Channels
Digital Channels 1
Analog Channels 0
Channels scan may take 20+ minutes
Exit
EXIT
To Next Page
Loading...
Need help?
General
