HGS17060EW, HGS17060ES
Transport and location
EN-9
Transport and location
Transporting and unpacking the freezer
NOTICE
Risk of damage!
Improper handling of the freezer may result in dam-
age.
• If possible, do not tilt the freezer into a horizontal
position. Only rest it against the wall to change the
door hinges.
• Where possible, transport the freezer only at a max-
imum inclination of 45°.
• Do not use any sharp objects when removing the
protective film from the door surface.
1. Move the freezer to the intended location using a trolley or
with the help of a second person.
2. Remove the packaging material and all protective foils from
the interior and exterior.
Selecting the right location
NOTICE
Risk of damage!
The freezer also may not function properly if it is ex-
posed for a prolonged period of time to temperatures
that are colder than the lowest temperature for which
it was designed.
• Observe the temperature limits.
• Select the location according to the temperature lim-
its and set the temperature according to the ambient
temperature.
• To achieve the highest possible cooling performance with the
least energy consumption, choose a location that
– is not too warm, is dry and well ventilated,
– is not exposed to direct sunlight and
– measures at least 11 m
3
.
To Next Page
Loading...
Need help?
General
