Basic Operation
HDG2000 Series Arbitrary Waveform Generator 19
Source”, press ENT button to open “Clock Source” interface.
2. Press F1 to select internal source.
3. Press F1 twice to select external source.
4. Press F2 to exit.
2.2.2 System Infomation
It contains information about the device, hardware, software and law information.
2.2.3 System State
Please follow the steps to view the system's main state:
1. Press<Utility> button, and press F2-> F2->ENT button to go into Systatus interface.
2. Press F5 to exit.
Please follow the steps bellow to save the system state file:
1. Press<Utility> button, and press F2-> F2->ENT button to go into Systatus interface.
2. Press F1 to go into <File Brower>, then select dir (File Win or Disk Win) of the file to be saved.
3. Press F3 in the <File Brower>main menu, and then name the file.
4. Press F3 again to actually save the file.
5. Then it returns to the system state window.
6. Press F5 to exit.
Please follow the steps bellow to recall the system state file:
1. Press<Utility> button, and press F2-> F2->ENT button to go into Systatus interface.
2. Press F1 to go into <File Brower>, then select dir of the saved file.
3. Press F4 to recall the file selected to recall the state.
4. Then it returns to the system state window.
5. Press F5 to exit.
Please press <Utility> button, select <SysStatus>, and press F3 to select <last> to save last time
setting. When start up next time, the system is set by last time setting.
2.2.4 Update
Please follow the steps to update the system:
1. Copy .upk file to U disk. And insert U disk into device’s USB port.
2. Press “Save/Recall” button, then press F1 to switch to “Disk Win” window, rotate the knob to
“USB” and press “Enter” button to confirm.
To Next Page
Loading...
Need help?
General
