Harman SoundCraft Notepad 8FX User Manual

5.1.1: MONO INPUT CONTROLS
CHANNEL CONTROLS > MONO INPUT CONTROLS
5.1.1: MONO INPUT CONTROLS
HPF 100Hz
Activate the High Pass Filter
The High Pass Filter (HPF) is an 18dB/Octave lter that attenuates frequencies below 100Hz. This can be useful for
ltering out low ‘rumble’ from microphones aected by very low frequencies originating from for example, trac
noise, air ow and so on.
HF Level
Adjust the boost/attenuation of the high frequency shelving lter
The HF shelving lter has a xed frequency of 12kHz. Frequencies above this will be boosted or attenuated depend-
ing on the control setting. See section 1.02 for more detail.
MF Level
Adjust the boost/attenuation of the mid-frequency bell lter
This will adjust the gain or attenuation of the audio band centred according to the MF Frequency. This is an asym-
metric EQ, so boost has a wide bandwidth (low Q), and cut has a narrow bandwidth (High Q). See section 1.0.2 for
more detail.
LF Level
Adjust the boost/attenuation of the low frequency shelving lter
The LF shelving lter has a xed frequency of 80Hz. Frequencies below this will be boosted or attenuated depend-
ing on the control setting. See section 1.02 for more detail.
NOTEPAD 5, 8FX, 12FX User Manual

Harman SoundCraft Notepad 8FX Specifications

General

Brand	Harman
Model	SoundCraft Notepad 8FX
Category	Music Mixer
Language	English