8.1 FX CONTROL
LEXICON FX: FX CONTROL
8.1: FX CONTROL
FX TYPE
Select an effects processing algorithm
To engage one or more Lexcion eects algorithms, push down the Reverb, Chorus, or Delay button or any combi-
nation of the buttons. With all three buttons pressed, another algorithm for Karaoke is selected.
(Notepad-5 does not have Lexicon effects processing.)
Notepad-8FX and 12FX
The Notepad console has an internal FX processor with internal send and return routing. There are 4
different FX algorithms available, each with at least one adjustable parameter mapped to the PARAM-
ETER rotary control.
Notepad 8FX
Aux/FX Sends control input channel contributions to both the FX processor and the Aux output via the
Aux master control. The processed signal is returned from the Lexicon FX processor at unity gain to
the master mix, so the Aux master acts as the overall wet/dry control.
Notepad 12FX
Aux/FX Sends control input channel contributions to both the FX processor and the Aux output. The
effects routing is direct from the bus without passing through the Aux master control.
The FX Return channel is a stereo return channel for the output of the Lexicon FX processor. The
signal on this channel can be replaced with that from an external effects processor by inserting jacks
11 and 12.
To use the effects, simply turn up an active input channel’s Aux/FX send control; with the effects but-
tons down for the selected processing algorithm and rotate the PARAMETER knob. Make sure either
the Aux master (Notepad 8FX) or the FX RTN (Notepad 12FX) are turned up to hear the effect.
PARAMETER
Adjusts effects parameters mapped to these controls
Dierent eects algorithms require dierent parameters for control. When you select a new algorithm, those
parameters are assigned to the PARAMETER rotary control.
NOTEPAD 5, 8FX, 12FX User Manual
To Next Page
Loading...
Need help?
General
