Hayward Navigator Pro Troubleshoot Manual

A Frame Removal & Replacement
Page 20
1. Remove the pod and A-frame bushings from the lower body on both sides (fig
27).
2. Remove the screw and saddle assembly holding the A-Frames in place from
the inside of the lower body (fig 28). Tighten Securely when replacing.
3. Pull the A-Frame arms in towards each other from inside the lower body to
remove (fig 29)
Note: If either the pods or the A-Frames are worn, replace both for proper operation.
Figure 28 Figure 29Figure 27

Hayward Navigator Pro Specifications

General

Brand	Hayward
Model	Navigator Pro
Category	Swimming Pool Vacuum
Language	English