Pre-Installation Checklist
The majority of issues experienced with the cleaner are due to
improper installation or expectations. The following pre-installation
checklist will ensure correct performance.
• Is the pump size adequate to supply enough suction to operate
the cleaner (use the flow gauge)?
• If using the skimmer, does it have one port or two? If only one
port, the main drain may need to be shut off or disabled.
• If you have a dedicated suction line, make sure it is the right
size (at least 1 ½”) and has a “Vac-Lock” for safety.
• The pool must have at least a 7” radius to climb walls.
• The cleaner is not designed to be used to clean a pool with
heavy construction debris or heavy storm debris. It is designed
to maintain a clean pool.
• The cleaner will not clean steps and loveseats, and may not
work well under a cover.
Page 4
To Next Page
Need help?
General
