• Never immerse the appliance in water or any other liquid.
• If the power cord is not long enough, an extension cord can be used. The cord should not be in a well
trafficked area as people can trip over the cord and pull the plug out of the socket.
• Clean the appliance according to the User Manual.
• Do not repair the appliance by yourself. Any possible hazard incurred by maintenance of the general
public will void the warranty. The power cord should be replaced by a qualified electrician.
• Please use the accessories provided by the manufacturer; otherwise, the appliance may be
damaged.
Special Recommendations
• Ensure that the appliance is positioned on a flat, large, dry surface without any obstacles nearby. A
minimum distance from furniture and walls is 50cm in all directions.
• The plug should be easily accessible.
• In order to maintain the function of the compressor, the appliance should always be in a vertical
position.
• Do not use the appliance near gas or other flammable liquids.
• Do not block the air outlet or the air inlet ventilation.
• Do not use spray (insecticides, paint) or any other flammable products near the appliance as the
plastic may become deformed. The unit may also sustain electrical damage.
Energy Saving Tips
• Keep blinds and /or draperies, on any windows, closed during the sunniest part of the day.
• Keep the filters clean. Under normal conditions, the filters should be cleaned every 2 weeks. Since
the filters remove airborne particles, more frequent cleaning may be necessary, depending on the
indoor air quality.
• Set the fan speed switch to high cool and the thermostat to the coolest position for the initial start-
up, then set the Fan switch to Low cool and lower the thermostat to a comfortable setting.
To Next Page
Loading...
Need help?
Operating Pressure
Performance
Weight and Dimensions
