HF Protoss-PW11 User Manual

HF2211S_EW1X_PW1X Operation Guide
http://www.hi-flying.com/ - 27 -
the product works in STA mode and connect to router.
Note: This method is very easy to config, but may encounter failure sometimes. Do as
following to try again.
➢ Check if phone connect to 2.4G router SSID.
➢ Set router 2.4G Wi-Fi to 802.11bg
5.4. TCP Server Test in STA Mode
Open TCP&UDP test tool and generate TCP connection as following steps. Device has
already created a TCP Server(port 8899) for use. TCP&UDP test tool can be downloaded
from the website:
➢ DestIP：Destination IP address.
➢ Port：Destination Port.

HF Protoss-PW11 Specifications

General

Brand	HF
Model	Protoss-PW11
Category	Network Hardware
Language	English