Handheld Thermography Camera User Manual
14
Note
You can go to Local Settings → Device Settings → Device Initialization → Measurement Tool
Initialization to initialize the temperature measurement parameters.
4.1.1 Set Unit
Go to Local Settings → Device Settings → Unit to set the temperature unit and distance unit.
Note
You can go to Local Settings → Image Settings → Display Settings to enable/disable the
temperature display.
4.2 Set Temperature Range
Set a temperature section and the palette only works for targets within the temperature section.
You can adjust the temperature range.
Steps
1. Select from the main menu.
2. Select auto adjustment or manual adjustment .
Select , and press . The device adjusts temperature range
parameters automatically.
Select , and press .
There are 2 ways to manually adjust the range:
● Adjust the temperature range based on selected area.
Tap on an interest area of the screen. A circle is displayed around
the area, and the palette readjusts to the temperature range of the
area.
● Adjust the maximum and minimum temperature of the range.
● Press or to select the max. temperature, min.
temperature, or both. You can also tap on the max. temperature
or min. temperature at the ends of the palette bar to select
them.
● Press or adjust the temperature value. You can also tap
on the arrows on the right side of the screen to adjust the
temperature value.
To Next Page
Loading...
Need help?
General
