Handheld Thermography Camera User Manual
25
Chapter 8 Thermal View APP Connection
The device supports both Wi-Fi connection and WLAN hot spot. Connect the device to HIKMICRO
Viewer, and you can control the device via mobile client.
8.1 Connect via Wi-Fi
Before You Start
Download and install HIKMICRO Viewer on your phone.
Steps
1. Go to Local Settings → Device Settings → Wi-Fi.
2. Tap to enable Wi-Fi, and the searched Wi-Fi will be listed as below.
Figure 8-1 Wi-Fi List
3. Select Wi-Fi and enter password.
Note
DO NOT tap enter or space, or the password may be incorrect.
4. Tap Close to hide the keypad.
5. Tap OK.
To Next Page
Loading...
Need help?
General
