Thermal Image Scope User Manual
7
Power Off
When the device is turned on, hold for 2 seconds to power off the device.
Note
● Power-off countdown will appear when you power off the device. You can press any key to
interrupt the countdown and cancel the power-off.
● Automatic low battery power-off cannot be canceled.
Auto Power Off
Set the auto power off time for your device, and then the device will automatically shut down as
the set time.
Steps
1. Hold the wheel to go to the menu.
2. Rotate the wheel to select General Settings, and select .
3. Rotate and press the wheel to select the auto power off time as required.
4. Hold the wheel to save and exit.
Note
● See the battery icon for the battery status. means the battery is fully charged, and
means that the battery is low.
● When the low power note shows, charge the battery.
● The auto power off countdown will start again when the device exits standby mode, or the
device is restarted.
2.5 Menu Description
2.5.1 Main Menu
When the device is turned on, hold the wheel to show the menu.
In the menu, you can rotate the wheel to select functions, press the wheel to configure the
selected function, and hold the wheel to exit the menu.
To Next Page
Loading...
Need help?
General
