User Manual of Network Camera
57
Or Configuration > Advanced Configuration > Video / Audio > Audio
Figure 6-26 Audio Settings
2. Configure the following settings.
Audio Encoding: G.722.1, G.711 ulaw, G.711alaw, G.726, and MP2L2 are
selectable. And 32kbps, 64kbps, and 128kbps are supported if MP2L2 is selected.
Audio Input: MicIn and LineIn are selectable for the connected microphone and
pickup respectively.
Input Volume: 0-100
Environmental Noise Filter: Set it as OFF or ON. When you set the function on
the noise detected can be filtered.
3. Click Save to save the settings.
6.4.3 Configuring ROI Encoding
ROI stands for the region of interest. And the ROI encoding enables you to
discriminate the ROI and background information in compression, that is to say, the
technology assigns more encoding resource to the region of interest to increase the
quality of the ROI whereas the background information is less focused.
Steps:
1. Enter the ROI settings interface
Configuration > Advanced Configuration > Video / Audio >ROI
To Next Page
Loading...
Need help?
General
