User Manual of HD-TVI Speed Dome
© Hikvision
Steps:
(1) Move the cursor to SET BLANK and click IRIS+ button to enter the editing mode as shown in
the following figure. You can see a privacy mask on the live window.
ADJUST MASK POS
FOCUS SHIFT STATUS
IRIS + SAVE
IRIS - CANCEL
Figure 3-9 Set the Privacy Mask
(2) You can see ADJUST MASK POS message on the screen. Click the direction buttons to adjust
the position of the privacy mask to the designed scene.
(3) Click FOCUS+ button, and you can see ADJUST MASK SIZE message on the screen. Click the
up/down buttons to increase/decrease the height of the mask and click right/left buttons to
increase/decrease the width of the mask. Click IRIS+ button to save the settings and return
to the previous menu and you can see the mask turn to gray.
(4) To modify the configured mask, click IRIS+ button to enter the SET MASK menu and click
IRIS+ button again to edit.
The tilt range for configuring the privacy masks is from 0° to 70°.
4. Enable or disable the privacy mask function.
Move the cursor to BLANK STATUS. Click IRIS+ button to enter the editing mode and click the up
and down direction buttons to set it ON or OFF.
If no privacy mask has been configured, you cannot set the status as ON.
5. Delete the privacy mask.
You can enter the DELETE MASK menu to delete the all the configured privacy masks.
3.3.5 Configuring Output Standard
Purpose:
The video output standard, including resolution and frame rate, can be changed according to the
actual requirement.
Steps:
1. Move the cursor to enter the Vide Settings submenu:
MAIN MENUS > DOME SETTINGS > VIDEO SETTINGS
2. Move the cursor to VIDEO STD and click IRIS+ to enter the editing mode.
To Next Page
Loading...
Need help?
General
