HIKVISION DS-2CD2345G0P-I User Manual

Network Camera User Manual
118
Figure 10-13 Arming PIR Alarm
 Emergency Alarm
Purpose:
You can press the Emergency button on the remote control to trigger the Emergency
Alarm in case of an emergency.
Note: The remote control is required for the Emergency Alarm. Go to Configuration >
System> System Settings > Remote Control to study the remote control first.
Steps:
1. Enter the Emergency Alarm Settings interface:
Configuration > Event > Basic Event> Emergency Alarm
Setting Emergency Alarm
2. Check the checkbox to select the linkage methods taken for the Emergency alarm.
3. Click Save to save the settings.
Smart Events
You can configure the smart events by following the instructions in this section,
including audio exception detection, defocus detection, scene change detection,

HIKVISION DS-2CD2345G0P-I Specifications

General

Brand	HIKVISION
Model	DS-2CD2345G0P-I
Category	Security Camera
Language	English