HIKVISION DS-2CD24 Series User Manual

User Manual of Network Camera
109
Check the Enable Event-triggered Snapshot checkbox to check event-triggered
snapshot.
3. Select the quality of the snapshot.
4. Set the time interval between two snapshots.
5. Click Save to save the settings.
Uploading to FTP
You can follow below configuration instructions to upload the snapshots to FTP.
 Upload continuous snapshots to FTP
Steps:
1) Configure the FTP settings and check Upload Picture checkbox in FTP Settings
interface. Please refer to Section 6.3.10 Configuring FTP Settings for more
details to configure FTP parameters.
2) Check the Enable Timing Snapshot checkbox.
 Upload event-triggered snapshots to FTP
Steps:
1) Configure the FTP settings and check Upload Picture checkbox in FTP Settings
interface. Please refer to Section 6.3.8 Configuring FTP Settings for more details
to configure FTP parameters.
2) Check Upload Picture checkbox in Motion Detection Settings or Alarm Input
interface. Please refer to Step 3 Set the Alarm Actions Taken for Motion
Detection in Section 6.6.1, or Step 4 Configuring External Alarm Input in
Section 6.6.4.
3) Check the Enable Event-triggered Snapshot checkbox.

HIKVISION DS-2CD24 Series Specifications

General

Brand	HIKVISION
Model	DS-2CD24 Series
Category	Security Camera
Language	English