HIKVISION DS-2CD24 Series User Manual

User Manual of Network Camera
85
enabled.
1. Click Edit to set the arming schedule.
2. Choose to trigger alarm actions as Notify Surveillance Center, Send Email,
Upload to FTP and Trigger Channel or trigger the Alarm Output.
3. Click Save to save the settings.
6.6.10 Configuring Defocus Detection
Purpose:
The image blur caused by defocus of the lens can be detected and a series of alarm
action can be triggered.
Steps:
1. Check the Enable Defocus Detection checkbox.
2. Choose to trigger alarm actions as Notify Surveillance Center and Send
Email, or trigger the Alarm Output.
3. Click Save to save the settings.
Figure 6-54 Configuring Defocus Detection
6.6.11 Configuring Scene Change Detection
Purpose:
Scene change detection is used to detect the change of surveillance environment
affected by the external factors; such as the intentional rotation of the camera.
Steps:
1. Check the Enable Scene Change Detection checkbox.
Sensitivity: Range [1%-100%]. The higher the sensitivity, the easier the

HIKVISION DS-2CD24 Series Specifications

General

Brand	HIKVISION
Model	DS-2CD24 Series
Category	Security Camera
Language	English