HIKVISION DS-2CD24 Series User Manual

User Manual of Network Camera
59
 The dynamic region refers to the ROI defined by intelligent analysis such as
human face detection. You can choose the Image Quality Enhancing level for
the ROI encoding.
5. Click Save to save the settings.
6.4.4 Display Info. on Stream
Check the checkbox to enable the function of Dual-VCA which can be used
cooperatively with NVR to implement dual-VCA retrieval during playback.
Figure 6-28 Display Info. on Stream
6.5 Configuring Image Parameters
6.5.1 Configuring Display Settings
Purpose:
You can set the image quality of the camera, including brightness, contrast, saturation,
hue, sharpness, etc.
Note:
The display parameters vary according to the different camera model. Please refer to
the actual interface for details.
Steps:
1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the camera.
Note:
In order to guarantee the image quality in the different illumination, it provides two

HIKVISION DS-2CD24 Series Specifications

General

Brand	HIKVISION
Model	DS-2CD24 Series
Category	Security Camera
Language	English