User Manual of Network Camera
125
Configuration file is used for the batch configuration of the camera, which can
simplify the configuration steps when there are a lot of cameras needing configuring.
Steps:
1. Enter the Maintenance interface: Configuration > Basic Configuration> System >
Maintenance, or Configuration>Advanced Configuration> System > Maintenance
2. Click Export to export the current configuration file, and save it to the certain
place.
3. Click Browse to select the saved configuration file and then click Import to start
importing configuration file.
Note:
You need to reboot the camera after importing configuration file.
4. Click Export and set the saving path to save the configuration file in local
storage.
Figure 11-14 Import/Export Configuration File
11.7.4 Upgrading the System
Steps:
1. Enter the Maintenance interface: Configuration > Basic Configuration> System >
Maintenance , or Configuration > Advanced Configuration> System > Maintenance
2. Select firmware or firmware directory to locate the upgrade file.
Firmware: Locate the exact path of the upgrade file.
Firmware Directory: Only the directory the upgrade file belongs to is required.
3. Click Browse to select the local upgrade file and then click Upgrade to start
remote upgrade.
To Next Page
Loading...
Need help?
General
