Network Camera User Manual
181
3. Select Statistics Time.
4. Click Counting to generate the report.
5. (Optional) Click Export in the upper right corner to export the data in desired
format (.txt and xls. are selectable.).
Raw Data
Storage of Raw Data
Raw data of queue management is saved in local storage of the device.
With an on-board memory card installed, the device can save up to one mouth’s data.
With NO memory card installed, the device can only save up to one week’s data.
Raw Data Exporting
Raw data exporting of queue management is not available on web browser. For
further analysis, you can get the data via RTSP protocol.
Open Platform
Purpose:
Open platform allows you to install the application for the third-party function
development.
Note:
Only certain camera models support the function, and the actual display may vary
with your camera model.
When you use the open platform function, it is not recommended to set your IP
address and the camera IP address to 192.168.252.X.
Steps:
1. Enter the Record Schedule Settings interface: Configuration > Open Platform.
To Next Page
Loading...
Need help?
General
