HIKVISION DS-2CD5A46GO-IZS User Manual

Network Camera User Manual
57
Modify an IP
(3) Click the OK to finish modifying.
 Delete an IP Address or IP Addresses.
Select the IP address(es) and click Delete.
5. Click Save to save the settings.
Security Service
To enable the remote login, and improve the data communication security, the camera
provides the security service for better user experience.
Steps:
1. Enter the security service configuration interface: Configuration > System >
Security > Security Service.
Security Service
2. Check the checkbox of Enable Illegal Login Lock.
Illegal Login Lock: it is used to limit the user login attempts. Login attempt from
the IP address is rejected if admin user performs 7 failed user name/password
attempts (5 times for the operator/user).
Note: If the IP address is rejected, you can try to login the device after 30 minutes.
Advanced Security
Follow the steps below to set the advanced security parameters for the camera.

HIKVISION DS-2CD5A46GO-IZS Specifications

General

Brand	HIKVISION
Model	DS-2CD5A46GO-IZS
Category	Security Camera
Language	English