HIKVISION DS-3E1326P-EI User Manual

DS-3E1xxxP Series 100 Mbps PoE Switches Quick Start Guide
QSG DS-3E1xxxP Switch 012721NA 11
Figure 3-1 Grounding with Grounding Bar
4.1.2 Without Grounding Bar
If there is no grounding bar, but the earth is nearby and the grounding body is allowed to be buried, follow
the steps below.
Steps
1. Bury an angle steel or steel pipe 1 ft 7 in (≥0.5 m) into the ground.
2. Weld one end of the grounding cable to the angle steel or steel pipe and embalm the welding point via
electroplating or coating.
3. Connect the other end of the grounding cable to the grounding terminal.
Figure 3-2 Grounding with Angle Steel

HIKVISION DS-3E1326P-EI Specifications

General

Switch type	-
Product color	Blue
Housing material	Metal
Combo SFP ports quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity	24
10G support	No
Full duplex	Yes
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Forwarding rate	6.5472 Mpps
MAC address table	16000 entries
Input current	6.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	400 W
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) power per port	30 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	221 mm
Width	440 mm
Height	44 mm
Weight	2830 g