HIKVISION DS-3E1326P-EI User Manual

DS-3E1xxxP Series 100 Mbps PoE Switches Quick Start Guide
QSG DS-3E1xxxP Switch 012721NA 9
3 Installation
Please select the appropriate installation method according to the actual needs.
Before You Start
• Ensure that the desktop or rack is stable and firm enough.
• Keep the room well ventilated. Keep at least 3.9" (10 cm) distance around the device for heat
dissipation.
• Keep at least 0.59" (1.5 cm) vertical distance between two adjacent devices for rack-mount
installation.
3.1 Desk-Mounted Installation
Place the device on the desk.
3.2 Wall-Mounted Installation
Steps
1. Check the distance between the two hanging holes on the rear cover of the device.
2. Insert two M4 screws into the wall.
Prepare two M4 screws.
Ensure that the distance between the two screws equals that between the two
hanging holes.
Set aside at least 4 mm screws outside the wall.
3. Align the hanging holes with screws, and hang the device on the screws.
Figure 2-1 Wall-Mounted Installation

HIKVISION DS-3E1326P-EI Specifications

General

Switch type	-
Product color	Blue
Housing material	Metal
Combo SFP ports quantity	2
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity	24
10G support	No
Full duplex	Yes
Networking standards	IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Forwarding rate	6.5472 Mpps
MAC address table	16000 entries
Input current	6.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	400 W
Total Power over Ethernet (PoE) budget	370 W
Power over Ethernet (PoE) power per port	30 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Depth	221 mm
Width	440 mm
Height	44 mm
Weight	2830 g