HIKVISION DS-3E1510P User Manual

Chapter 4 Switch Conguraon
4.1 Port Conguraon
4.1.1 Aribute Conguraon
The basic parameters can inuence the working status of ports. Congure the parameters
according to the actual situaon.
Steps
1. Go to Switch
Conguraon → Basic Conguraon → Port Conguraon → Aribute
Conguraon .
Figure 4-1 Port Aribute Conguraon
2. Congure the parameters.
Speed
The speed of data transmission of the port.
• PoE port: The default is auto.
• SFP
ber opcal port: The default is auto that cannot be edited.
Duplex
The duplex mode of the port.
• PoE port: The default is auto that cannot be edited.
• SFP
ber opcal port: The default is auto that cannot be edited.
Flow Control
Enabling the ow control can prevent data loss in data transmission.
Gigabit PoE Switch Web User Manual
7

HIKVISION DS-3E1510P Specifications

General

Brand	HIKVISION
Model	DS-3E1510P
Category	Switch
Language	English