HIKVISION DS-3E1510P User Manual

Note
All ports in the same aggregaon group will be edited automacally at the same me.
-
Trunk Port
•
A trunk port is a port that is assigned to carry
trac for all the VLANs.
• Select Port VLAN Type as TRUNK, select the PVID and enter the VLAN that are allowed
to be accessed.
Figure 4-12 Edit a Trunk Port VLAN
Note
• All ports in the same
aggregaon group will be edited automacally at the same me.
• You can check All VLANS are allowed to be accessed. to assign the port to all the VLANs.
4. Click OK.
5. Click Save to save the conguraon.
4.4 QoS
Conguraon
Quality of Service (QoS) includes the transmission bandwidth, delay, packet loss rate and etc.
Increasing network bandwidth, decreasing network delay, and reducing packet losses can improve
QoS in network service. You can congure the scheduling mode and port priority of QoS.
Steps
1. Go to Switch
Conguraon → Basic Conguraon → QoS → Scheduling Mode to select a
scheduling type.
Gigabit PoE Switch Web User Manual
16

HIKVISION DS-3E1510P Specifications

General

Brand	HIKVISION
Model	DS-3E1510P
Category	Switch
Language	English