Need help?Do you have a question about the HIKVISION DS-7104HQHI-K1 and is the answer not in the manual?
General| Voltage | 12 V |
|---|---|
| Product color | White |
| Rack capacity | 1U |
| Audio output channels | 1.0 channels |
| Video compression formats | H.264, H.264+, H.265, H.265+ |
| BNC input ports | 1 |
| Video input channels | 4 channels |
| USB 2.0 ports quantity | 2 |
| Ethernet LAN | Yes |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, NFS, iSCSI, UPnP, HTTPS, ONVIF |
| HDD interface | Serial ATA |
| Maximum HDD capacity | 4000 GB |
| Power consumption (typical) | 8 W |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Weight | 1000 g |
|---|---|
| Dimensions (WxDxH) | 200 x 200 x 45 mm |
Provides information about the manual's scope and application.
Outlines limitations of liability and user responsibilities.
Details compliance with Federal Communications Commission rules.
Confirms adherence to European Union directives.
Lists general features applicable to all models.
Describes features for direct monitoring via the device.
Details additional functionalities available on the device.
Explains features for remote access and network connectivity.
Describes the components and indicators on the front of the device.
Explains how to operate the device using the IR remote.
Details how to use a USB mouse for device control.
Explains the on-screen keyboard and input methods.
Describes the ports and connectors on the rear of the device.
Provides instructions for powering the device on and off.
Guides through the initial setup and password creation.
Explains how to set and use a graphical unlock pattern.
Details the initial setup steps via a wizard.
Covers user authentication and session management.
Provides steps for recovering or changing the admin password.
Guides on how to connect IP cameras to the DVR.
Details connecting IP cameras detected on the network.
Explains how to modify settings for connected IP cameras.
Instructions for connecting Power over Coaxitron cameras.
Checks the status of connected video signal inputs.
Overview of displaying real-time video from cameras.
Covers various functions available in live view.
Explains mouse controls for live view operations.
Details how to manage primary and secondary video outputs.
Describes the toolbar for fast access to live view functions.
Feature for reducing bandwidth usage for remote viewing.
Customizes display parameters for live view.
Performs manual checks on video quality.
Sets up parameters for Pan, Tilt, and Zoom cameras.
Configures camera positions and movement sequences.
Defines specific camera positions for quick recall.
Recalls previously saved camera positions.
Sets up automated camera movement paths.
Activates pre-defined camera patrol sequences.
Records and defines custom camera movement patterns.
Executes recorded custom camera movement patterns.
Defines the start and end points for linear scanning.
Initiates the linear scanning function.
Activates pre-defined parking positions for PTZ cameras.
Interface for manually controlling PTZ camera movements.
Sets video compression, resolution, and bitrate for recording.
Defines when the device should record video.
Sets up recording triggered by motion events.
Configures recording based on external alarm inputs.
Enables recording for various event types like VCA.
Allows direct control to start or stop recording.
Sets recording schedules specifically for holidays.
Sets up dual recording for enhanced data safety.
Organizes multiple HDDs into logical groups.
Secures recorded files from being overwritten or deleted.
Bulk enables/disables advanced codecs for analog cameras.
Enables a lower resolution mode for compatibility.
Accesses and reviews recorded video footage.
Quickly plays back the last few minutes of footage.
Searches and plays back footage by date and time.
Locates recordings based on specific event types.
Searches and plays back footage using custom tags.
Advanced search based on motion or VCA events.
Plays back video associated with system log entries.
Plays back video from multiple time segments simultaneously.
Plays back video files from external storage devices.
Provides additional tools for reviewing recorded video.
Allows detailed review of video by single frames.
Magnifies specific areas within the video playback.
Plays back footage from multiple channels in reverse.
Procedures for saving recorded video and data.
Backs up footage found via normal search.
Backs up footage identified by event search.
Exports selected video clips for backup.
Tools for managing external storage devices used for backup.
Configures the device to detect and respond to motion.
Configures the device to respond to external sensor inputs.
Sets up detection and response for video signal loss.
Detects and responds to camera lens tampering.
Configures continuous monitoring of video image quality.
Manages device errors like HDD issues or network disconnections.
Defines how the device reacts to triggered alarms.
Sets up integration with Point of Sale systems.
Assigns POS data to specific video channels.
Configures alarms triggered by POS events.
Configures the device to detect human faces in video.
Configures the device to detect vehicles and license plates.
Sets up detection zones for objects crossing a virtual line.
Configures detection for unauthorized entry into a virtual region.
Detects objects entering a defined virtual area.
Detects objects leaving a defined virtual area.
Detects objects remaining in a virtual area for too long.
Detects when multiple people gather in an area.
Detects objects moving rapidly within a virtual region.
Detects unauthorized parking of vehicles in restricted areas.
Detects objects left unattended in a defined area.
Detects when objects are removed from a defined area.
Detects abnormal audio events like sudden volume changes.
Detects when the camera lens becomes defocused.
Detects unexpected changes in the camera's view.
Detects motion using Passive Infrared sensors.
Searches for recorded footage based on detected faces.
Searches for footage based on detected behavioral patterns.
Searches for footage based on vehicle license plates.
Analyzes and reports on people counting data.
Visualizes customer traffic patterns and dwell times.
Sets basic network parameters like IP address and DNS.
Configures advanced network parameters.
Sets up Point-to-Point Protocol over Ethernet connection.
Enables remote access via the Hik-Connect platform.
Configures Dynamic DNS for persistent network access.
Sets up a server for network time synchronization.
Enables Universal Plug and Play for network discovery.
Adjusts additional network parameters like alarm host and ports.
Sets the port for secure web access to the device.
Sets up email notifications for events and alarms.
Monitors real-time network data flow.
Configures network diagnostics.
Tests network connectivity for delay and packet loss.
Exports captured network data packets.
Verifies the current network connection status.
Monitors network bandwidth usage.
Prepares new hard disk drives for use with the DVR.
Adds and configures network storage devices (NAS/IP SAN).
Organizes and manages multiple HDDs in groups.
Assigns HDDs to specific groups for recording.
Configures HDD properties like Redundancy or Read-only.
Allocates specific storage quotas for each camera.
Sets up cloud storage for remote file access and backup.
Monitors the operational status of installed HDDs.
Accesses Self-Monitoring, Analysis and Reporting Technology data for HDDs.
Performs diagnostics to identify bad sectors on HDDs.
Sets up notifications for HDD errors or failures.
Customizes on-screen display parameters for cameras.
Defines privacy zones to mask sensitive areas in video.
Adjusts video quality and image settings for cameras.
Fine-tunes parameters like brightness, contrast, and saturation.
Configures advanced camera features like defog and WDR.
Displays details about the DVR's hardware and software.
Retrieves and analyzes system event logs for troubleshooting.
Manages IP camera configuration via files.
Backs up or restores DVR configuration settings.
Updates the DVR firmware for new features and fixes.
Updates firmware using a local storage device.
Updates firmware using a remote FTP server.
Updates firmware for connected analog cameras.
Resets the device to factory default configurations.
Sets general parameters like language, time, and resolution.
Configures Daylight Saving Time adjustments.
Adjusts device name, logout timeout, and output modes.
Manages user access and permissions on the DVR.
Creates new user accounts with specific privilege levels.
Removes existing user accounts from the system.
Modifies parameters for existing user accounts.
Provides detailed technical specifications for various models.
Technical specifications for the DS-7100HQHI-K1 model.
Technical specifications for the DS-7200HQHI-K1 model.
Technical specifications for the DS-7200HQHI-K2 model.
Technical specifications for the DS-7200HUHI-K1 model.
Technical specifications for the DS-7200HUHI-K2 model.
Technical specifications for the DS-7200HQHI-K/P model.
Technical specifications for the DS-7200HUHI-K/P model.
Technical specifications for the DS-7300HQHI-K4 model.
Defines technical terms and acronyms used in the manual.
Provides solutions for common device issues and errors.
Lists updates and changes across different software versions.
Details additions and modifications in version 3.5.20.
Details additions and modifications in version 3.5.10.
Details additions and modifications in version 3.5.0.
Lists IP cameras from Hikvision that are compatible with the DVR.
Lists compatible IP cameras from other manufacturers.
To Next Page
