HIKVISION DS-7108HGHI-K1 User Manual

Figure 6-4 PPPOE
2.
Turn on Enable.
3.
Enter user name and password.
4.
Click Save.
What to do next
If you can get the dynamic IP, the PPPOE status is normal.
6.2.4 NAT
Two ways are provided for port mapping to realize the remote access via the cross-segment
network, UPnP™ and manual mapping.
Before You Start
Enable the UPnP™ funcon of your router if UPnP™ is required. When the device network working
mode is
mul-address, the default device route should be on the same network segment as the
LAN IP address of the router.
Steps
1.
Go to Conguraon → Network → General → NAT .
Digital Video Recorder User Manual
41

HIKVISION DS-7108HGHI-K1 Specifications

General

Audio system	2-way
Product color	White
Video streaming	Yes
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+, H.265, H.265 Pro
Playback resolutions supported	1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768
DC voltage	12 V
Power supply type	DC
Power consumption (typical)	17 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	8
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	SATA
Maximum HDD capacity	4000 GB
Number of users	32 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS

Weight and Dimensions

Width	200 mm
Height	45 mm
Weight	800 g