HIKVISION DS-7108HGHI-K1 User Manual

IP address of the NTP server.
4.
Click Apply.
6.2.7 Log Server Sengs
Upload Logs to the Server
You can upload system logs to the server for backup.
Steps
1.
Go to Conguraon → Network → General → Log Server Sengs .
Figure 6-6 Log Server Sengs
2.
Turn on Enable
3.
Set Upload Time Interval, Server IP Address, and Port.
4.
Oponal: Click Test to test if parameters are valid.
5.
Click Apply.
One-Way
Authencaon
You can install a CA cercate (from the server) to your device to authorize the server via web
browser. It would improve the log communicaon security.
Before You Start
●
Download the CA cercate from the server.
●
Ensure log server parameters are valid.
Steps
1.
Go to
Conguraon → Network → Advanced Sengs → Log Server Conguraon .
Digital Video Recorder User Manual
44

HIKVISION DS-7108HGHI-K1 Specifications

General

Audio system	2-way
Product color	White
Video streaming	Yes
Maximum video resolution	1920 x 1080 pixels
Video compression formats	H.264, H.264+, H.265, H.265 Pro
Playback resolutions supported	1920 × 1080, 1280 × 1024, 1280 × 720, 1024 × 768
DC voltage	12 V
Power supply type	DC
Power consumption (typical)	17 W
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %
BNC input ports	8
Video input channels	8 channels
USB 2.0 ports quantity	2
HDD interface	SATA
Maximum HDD capacity	4000 GB
Number of users	32 user(s)
Ethernet interface type	Fast Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP, HTTPS

Weight and Dimensions

Width	200 mm
Height	45 mm
Weight	800 g