5.6 Video Parameters Setup
and hue, etc.
You can setup the camera individually, and also you can copy the video
parameters of one camera to any other cameras. Here are the setup steps:
Step 1: Enter into “Camera” ,select a camera then enter “Color setup” menu.
Shown as fig5.12
For different camera and different background, in order to get the best video
image, you need to adjust video parameters such as brightness, saturation, contrast
Fig 5.12 Color setup
Step 2: Select camera: Please use【Ç】【È】keys to select one camera.
Step 3: Adjust brightness, contrast, saturation and hue: Move “Active Frame” to
the “Adjust” button on the right side of Brightness, Contrast, Saturation and Hue,
press 【ENTER】key, you will enter into the corresponding adjust interface. In the
adjust interface, there is one scroll bar at the bottom, you can use【Ç】【È】keys to
adjust and can find the video image will be changed at the same time. When you are
satisfied with the real time video image, press【ENTER】to return “Color” menu.
Step 4: You can copy the video parameters of current camera to any other
cameras. Or you can repeat setp2 and step3 to adjust for any other camera.
46
To Next Page
Loading...
Need help?
General