HIKVISION DS-7332HGHI-SH Quick Start Guide

1 1 A D D A N A L O G C A M E R A S ( c o n t i n u e d )
12 V I E W L I V E V I D E O
Live View displays real-time video.
13 S E T U P R E C O R D I N G
Set up recording to capture camera video.
 Continuous Recording (Default)
1. Go to MENU > RECORDING CONFIGURATION.
2. Click CONTINUOUS under the calendar (blue) and the cursor will change to a wand.
3. Select the calendar days you wish to record continuously and the days will turn blue.
4. Press APPLY.
Icons in the upper
-
rig
ht of screen show
each camera’s record and alarm status.
• Alarm (video loss, tampering, motion
detection, sensor alarm, or VCA
alarm)
• Record (manual record, continuous
record, motion detection, alarm, or
VCA triggered record)
• Event/Exception (event and
exception information appears at
lower-left corner of screen)

CAMERA LIST
List of analog cameras
 STATUS
Camera enabled or disabled
ENABLE
Check checkbox to enable camera
ANALOG
Check/uncheck to enable/disable
all analog cameras
APPLY
Click to accept settings

NOTE: To change camera
name, go to OSD.





HIKVISION DS-7332HGHI-SH Specifications

General

HDD capacity	18000 GB
HDD interface	Serial ATA
Number of HDDs supported	4
Product color	Black
Channels quantity	32 channels
Maximum frame rate	30 fps
Video compression formats	H.264
Playback resolutions supported	1920x1080, 1280x1024, 1280x720, 1024x768, 704x576, 704x480
BNC input ports	32
USB 2.0 ports quantity	3
Ethernet interface type	Gigabit Ethernet
Supported network protocols	TCP/IP, PPPoE, DHCP, EZVIZ Cloud P2P, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, iSCSI, UPnP, HTTPS
Power requirements	100-240V AC, 47 - 63Hz
Operating temperature (T-T)	-10 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Dimensions (WxDxH)	445 x 390 x 70 mm