Quick Operation Guide of DS-9600/8600/7600NI-ST Series NVR
18
Menu Operation
Menu Structure
The menu structure of the DS-9600/8600NI-ST Series NVR is shown as below:
Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
To start your NVR:
1. Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power indicator LED on
the front panel should be red, indicating the device gets the power supply.
2. Press the POWER button on the front panel. The Power indicator LED should turn green. The unit will begin
to start.
To shut down the NVR:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Select the Shutdown button.
3. Click the Yes button.
To Next Page
Loading...
Need help?
General