HIKVISION DS-7732NXI-K4 User Manual

Figure 6-22 Set Arming Schedule
3.
Click Apply.
6.6.7
Congure Alarm Linkage Acon
Congure Alarm Pop-up Window
When an alarm is triggered, the local monitor displays in full screen the video image from the
alarming channel
congured for full screen monitoring. And when the alarm is triggered
simultaneously in several channels, you must congure the auto-switch dwell me.
Steps
1.
Go to Conguraon → System → Live View → General .
2.
Set the event output and dwell
me.
Alarm Pop-up Output
Select the output to show event video.
Alarm Pop-up Delay
Set the me in seconds to show alarm event image. If alarms are triggered simultaneously in
several channels, their full-screen images will be switched at an interval of 10 seconds
(default dwell
me).
3.
Click Linkage Acon of the alarm detecon.
4.
Select Alarm Pop-up Window alarm linkage acon.
5.
Select the channel(s) in Trigger Channel sengs you want to make full screen monitoring.
Note
Auto-switch will terminate once the alarm stops and back to the live view interface.
Network Video Recorder User Manual
76

HIKVISION DS-7732NXI-K4 Specifications

General

Brand	HIKVISION
Model	DS-7732NXI-K4
Category	Network Hardware
Language	English