HIKVISION DS-7732NXI-K4 User Manual

Congure Buzzer Alarm
The audio warning enables the video recorder to trigger an audible beep when an alarm is
detected.
Steps
1.
Go to
Conguraon → System → Live View → General .
2.
Turn on Audio, and set Volume.
3.
Go to Linkage
Acon interface of the alarm detecon.
4.
Select Buzzer Alarm linkage acon.
Nofy
Surveillance Center
The video recorder can send an excepon or alarm signal to the remote alarm host when an event
occurs. The alarm host refers to the computer installed with client soware (e.g., iVMS-4200,
iVMS-5200).
Steps
1.
Go to Conguraon → Network → General → More Sengs .
2.
Set Alarm Host IP and Alarm Host Port.
3.
Go to Linkage
Acon interface of the alarm detecon.
4.
Select Nofy Surveillance Center.
Congure
Email Linkage
The video recorder can send an email with alarm informaon to a user or users when an alarm is
detected.
Steps
1.
Go to
Conguraon → Network → Email .
2.
Congure the sengs.
3.
Go to Linkage Acon interface of the alarm detecon.
4.
Select Send Email as alarm linkage acon.
Trigger Alarm Output
The alarm output can be triggered by the normal and smart events.
Steps
1.
Go to Linkage Acon interface of the alarm input or event detecon.
2.
Click Trigger Alarm Output.
3.
Select the alarm outputs to trigger.
Network Video Recorder User Manual
77

HIKVISION DS-7732NXI-K4 Specifications

General

Brand	HIKVISION
Model	DS-7732NXI-K4
Category	Network Hardware
Language	English