HIKVISION DS-9600 Series Quick Operation Guide

Quick Operation Guide of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
3
Steps (for DS-8600NI-ST):
1. Remove the cover from the NVR by unfastening the screws on the back and side.
2. Install the HDD in the HDD rack using the provided screws. Fasten the screws on the
button to fix the HDD.
3. Connect one end of the data cable to the motherboard of NVR and the other end to the
HDD.
4. Connect the power cable to the HDD.
5. Re-install the cover of the NVR and fasten screws.

HIKVISION DS-9600 Series Specifications

General

Brand	HIKVISION
Model	DS-9600 Series
Category	Network Hardware
Language	English