HIKVISION DS-9600 Series Quick Operation Guide

Quick Operation Guide of DS-9600/8600/7700/7600NI-ST and DS-7700/7600NI-SP Series NVR
4
Steps (for DS-7600NI-ST/SP and DS-7700NI-ST/SP):
1. Remove the cover from the NVR by unfastening the screws on the rear and side
panel.
2. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.
3. Connect the power cable to the HDD.
4. Place the HDD on the bottom of the device and then fasten the screws on the bottom to fix the HDD.

HIKVISION DS-9600 Series Specifications

General

Brand	HIKVISION
Model	DS-9600 Series
Category	Network Hardware
Language	English