HIKVISION DS-9600NI-I16 Series User Manual

Network Video Recorder User Manual
217
Figure 13-1 RAID Working Flow
13.1.2 Enable RAID
Purpose:
Perform the following steps to enable the RAID function, or the disk array cannot be created.
Use the enterprise-level HDDs to create the array.
 OPTION 1:
Enable the RAID function in the Wizard when the device startup, please refer to step 7 of Chapter
2.2.
 OPTION 2:
Enable the RAID function in the HDD Management Interface.
Step 1 Enter the disk mode configuration interface.
Menu > HDD > Advanced

HIKVISION DS-9600NI-I16 Series Specifications

General

Brand	HIKVISION
Model	DS-9600NI-I16 Series
Category	Network Hardware
Language	English